Basic Startup and Use of A CB Radio
The CB radio continues to be an important communication tool for those on the road. Learn the basics of working a CB radio system and sending your first radio transmission over the network.
Even in this world full of mobile phone communication, the CB Radio System is still very much in use. Companies whose employees work on the field use CB, which stands for Citizen Band. The CB Radio System lets the company’s base of communications to contact their people on a particular frequency. There are shared frequencies in the radio system, allowing anyone to transmit communications. For beginners, it’s good to know the basics of operating a CB radio, as well as the etiquette involved in transmitting over it.
For effective CB communication, it’s of utmost importance to master the controls of the radio unit. Here are some of the controls that you will need to handle in order to join the radio network.
The Squelch controls interference that comes with radio signals and allows your unit to focus on the stronger communication. You will need to find a squelch balance. Set it too high and there will be no noise, but this setting will also disallow weaker signals from coming through.
Put the Mic Gain setting at its highest value to assure that your transmission will be heard by everyone on the CB Radio System.
The Volume knob controls the level of sound that comes from the radio speakers and have no effect on the sound through the network.
PA/CB toggles your voice through the speakers.
ANL and NB controls helps your radio unit focus on communication transmissions and lessen noise.
RF Gain controls the signal strength of both high and low frequencies that transmit to your CB radio unit.
CH19 is the universal emergency frequency.
Once you’ve got your radio unit plugged in and turned on, adjust the settings to allow transmission to come in. To send a radio transmission, you have to push the button of the mic and speak while the button is pressed. Once you release the mic button, your transmission ends.
The CB Radio System has lots of codes and lingo that you will need to learn with time and use, but the very basic is the use of the term “Break.” To join a conversation you hear over the CB Radio System, it’s customary to say “Break” if you need to join in or transmit a message to a different person or to everyone over the network. You may need to mention your name so that others may acknowledge your “break” by replying with “Go ahead”, mentioning your name.
Over time, you will master the CB radio language and be able to quickly and effectively communicate over this radio system.
http://www.walcottcb.com/
No comments:
Post a Comment